AUSTRALIAN MADE

AUSTRALIAN OWNED

MASONRY OR CLAY BRICK / BLOCK

CAN BE PAINTED OVER!

DIRECTIONS - CONCRETE BLOCKS (Flat)

1. Apply one liberal coat of 'Soak in Mix', (50% Sealit Multipurpose, 50% water), following each mortar line and then coating the face.

2. Allow to dry.

3. Apply one coat neat Sealit Multipurpose (applied as above).

4. Allow to dry.

DIRECTIONS - SPLIT FACED BLOCKS

1. Apply one liberal coat of 'Soak in Mix', (50% Sealit Multipurpose, 50% water), following each mortar line and then coating the face. (Additionally, work the spray in an upward motion on block face to force material into facets facing downwards.  Also, as these blocks have a much larger face area more material will be required).

2. Allow to dry.

3. Apply one coat neat Sealit Multipurpose (applied as above).

4. Allow to dry.

DIRECTIONS - BRICKS / CLAY BLOCKS

1. Apply one liberal coat of 'Soak in Mix', (50% Sealit Multipurpose, 50% water), following each mortar line and then coating the face.

2. Allow to dry.

3. Apply one coat neat Sealit Multipurpose (applied as above).

4. Allow to dry.

DIRECTIONS - PAINTED MASONRY BUILDINGS

1. Apply one liberal coat of 'Soak in Mix', (50% Sealit Multipurpose, 50% water).

2. Allow to dry.

3. Apply one coat neat Sealit Multipurpose (applied as above).

4. Allow to dry.

APPLICATION

Best method - Low pressure airless spray, pump up garden spray, or brush.

COVERAGE

Neat Sealit Multipurpose - Approximately 10m2 per litre.

'Soak in Mix', (50% Sealit Multipurpose, 50% water) - Approximately 5m2 per litre.

i.e. flat masonry surface - approx 100sqm / 20L pail - two coat application.

WARNING / NOTES

Sealit Multipurpose is not recommended as a final coating for traffic areas, tables, seats etc., or non porous surfaces; i.e. ceramic tiles, glazed bricks, glass etc.

During the curing period, (4-12 months), clear Sealit Multipurpose may show up slightly cloudy when wet. This will disappear when the surface dries out.

Wash all equipment immediately in water. If product has dried on equipment, clean with a petrol or mineral turpentine dampened cloth (Taking normal safety precautions).

As 'Sealit Multipurpose' dries clear, signwriting will not be affected.

GUARANTEES

Product guarantees are available to all approved applicators.