AUSTRALIAN
MADE
AUSTRALIAN
OWNED


Clear drying, water based, flexible, acrylic / synthetic rubber compound.

ADDS GREATLY TO THE LIFE OF AGING CANVAS PRODUCTS

SIZES - 1l, 2l, 4l, 10l, 20l - CLICK HERE FOR AVAILABILITY

Dealers

RECOMMENDED RETAIL PRICES


COMMON USES

*SEE BELOW FOR STANDARD DIRECTIONS**

 

TENTS

ANNEXES

AWNINGS

ANIMAL RUGS

GENERAL CLOTH CAMPING MATERIALS

AND MANY OTHER USES REQUIRING CANVAS PROTECTION!

 

DIRECTIONS

  1. Keep well mixed.

  2. Area to be treated must be clean and free of dirt and grease.

  3. Apply one liberal coat of Sealit Canvas-cote NOTE:- Best method of application, low pressure airless spray / pump up garden spray.

  4. Allow to dry.

  5. Apply additional coat/s as above if needed.

  6. Allow 24 hours drying time at 23°C before storing.

 

COVERAGE

Varying depending on variety and condition of surface to be treated.

 

WARNING / NOTES

Wash all equipment immediately in water. If product has dried on equipment, clean with a petrol or mineral turpentine dampened cloth (Taking normal safety precautions).

Canvas Cote is not recommended for chairs, bedding etc. as the coating may become slightly tacky in hot weather.

 


IMPORTANT
Directions for preparation and application are clearly written on the labels - Please follow them!
All instructions are a guide only - situations may vary and no liability is taken by Shalex Industries Pty Ltd. or the author – Product guarantees Issued by approved applicators only.
Back to Shalex Industries homepage