AUSTRALIAN MADE

AUSTRALIAN OWNED

CEMENT TILE ROOF

DIRECTIONS

1. Usually with cement tile rooves you simply need to first clean the roof with a high pressure cleaner. (If this is the case, skip straight to direction #3). Only usually in some instances, will you need to use a strong anti-fungal agent, (such as liquid pool chlorine diluted 1:2 in water for example). Allow 1-2 days for a fungal kill.

2. Remove the fungus with a high pressure cleaner.

3. Examine the roof for broken tiles and cement work in need of repair. Clean and repair the area being worked with Sealit Multipurpose, then add Sealit Multipurpose to the cement mix (approximately 1:4 with water), for a stronger union at the joints.

4. Apply one liberal coat of 'Soak in Mix', (50% Sealit Multipurpose, 50% water), generously applied in even strokes, giving total coverage to the entire roof.

5. Allow to dry.

6. If waterproofing is the optimum goal, apply one coat neat Sealit Multipurpose (as above). Finish.

7. However, (instead of Step 6) - if planning on recolouring the roof, a proven formula is to mix 50% acrylic paint, with 50% neat Sealit Multipurpose and apply 2 coats.

8. The edges of the roof should also be given care, and if necessary a neater finish can be obtained using a paintbrush.

9. For a hard protective finish as an optional extra, a coat of neat Glaze can be applied in the same fashion as above.

APPLICATION

Best method - Low pressure airless spray or pump up garden spray. Brush for the edges.

COVERAGE

Neat Sealit Multipurpose - Approximately 10m2 per litre.

'Soak in Mix', (50% Sealit Multipurpose, 50% water) - Approximately 5m2 per litre.

Sealit Multipurpose / Acrylic paint mix - Approximately 10m2 per litre.

Neat Glaze - Approximately 10m2 per litre.

i.e. flat masonry surface - approx 100sqm / 20L pail - two coat application.

WARNING / NOTES

During the curing period, (4-12 months), clear Sealit Multipurpose may show up slightly cloudy when wet. This will disappear when the surface dries out.

Wash all equipment immediately in water. If product has dried on equipment, clean with a petrol or mineral turpentine dampened cloth (Taking normal safety precautions).

GUARANTEES

Product guarantees are available to all approved applicators.