AUSTRALIAN MADE

AUSTRALIAN OWNED

CONCRETE FLOOR

PROTECTION PRIOR TO CARPET OR VINYL LAYING

(NOT TO BE LEFT AS A FINAL COAT FOR TRAFFIC)

DIRECTIONS

1. Apply one coat of neat Sealit Multipurpose or one liberal coat of 'Soak in Mix', (50% Sealit Multipurpose, 50% water), before laying carpet or vinyl to restrict rising damp.

2. Allow to dry.

3. Alternatively, if not covering with carpet or vinyl, see section on alternatively using Glaze on Pavers / Driveways and Carparks etc.

APPLICATION

Best method - Low pressure airless spray, pump up garden spray or roller.

COVERAGE

Neat Sealit Multipurpose - Approximately 10m2 per litre.

'Soak in Mix', (50% Sealit Multipurpose, 50% water) - Approximately 5m2 per litre.

i.e. flat masonry surface - approx 100sqm / 20L pail - two coat application.

WARNING / NOTES

Sealit Multipurpose is not recommended as a final coating for traffic areas, tables, seats etc., or non porous surfaces; i.e. ceramic tiles, glazed bricks, glass etc.

During the curing period, (4-12 months), clear Sealit Multipurpose may show up slightly cloudy when wet. This will disappear when the surface dries out.

Wash all equipment immediately in water. If product has dried on equipment, clean with a petrol or mineral turpentine dampened cloth (Taking normal safety precautions).

GUARANTEES

Product guarantees are available to all approved applicators.