AUSTRALIAN MADE

AUSTRALIAN OWNED

CONCRETE DECKS & BALCONIES & GENERAL WET AREAS - PRE-TILING

TANKING & PLANT BOXES

DIRECTIONS - DECKS AND BALCONIES

1. Check all construction has been properly completed - free from dust and gaps filled with suitable compound.

2. Cut 225gm fibreglass matting to size, (to cover only the joints, and any corners).

3. Apply one liberal heavy coat of primer 'Soak in Mix', (50% Sealit Multipurpose, 50% water) to the whole area making sure to cover the joints.

4. Allow to dry.

5. Apply coating of Sealit Liquid Membrane to total area, approximately 1.5-2mm thick.

6. While Sealit Liquid Membrane is still wet, embed the pre-cut sections of 225gm fibreglass matting into the first coat of Sealit Liquid Membrane making sure there is overlap in the matting, and also ensuring the matting is pressed firmly into the corners. (A flat scraper is ideal for this).

7. Next, apply membrane over the matting.

8. Allow to dry.

ADDITIONAL DIRECTIONS - TANKING / PLANT BOXES

1. As above. Fibreglass matting generally not required.

ADDITIONAL DIRECTIONS - GENERAL WET AREAS

1. As above. Use fibreglass matting and product may vary to suit individual situation.

APPLICATION

Best method - A thick brush.

COVERAGE.

Approximately 1.5 - 2 m2 per litre, job dependant.

WARNING / NOTES

Sealit Membrane / R.D.C. is not designed as a large gap size filler - pre-treat with suitable compound.

Sealit Membrane / R.D.C. is not suitable for traffic areas and must be covered with tiles - carpet or other suitable coating - DO NOT LEAVE EXPOSED.

Wash all equipment immediately in water. If product has dried on equipment, clean with a petrol dampened cloth (Taking normal precautions).

Sealit Membrane / R.D.C. is acknowledged by Queensland Government Authority as an Effective waterproofing agent.

Testing Sealit Membrane / R.D.C. on single leaf bricks, blocks, cavity brick & slabs, as a damp course shows no loss of bond strength & no moisture penetration of the membrane.

Sealit Membrane / R.D.C is not recommended as a final coating for traffic areas, tables, seats etc., or non porous surfaces; i.e. ceramic tiles, glazed bricks, glass etc.

GUARANTEES

Product guarantees are available to all approved applicators.