AUSTRALIAN MADE

AUSTRALIAN OWNED

CONCRETE FISH TANK / WATER TROUGH

NON TOXIC !

DIRECTIONS

1. Apply one liberal coat of 'Soak in Mix', (50% Sealit Multipurpose, 50% water), generously applied in even strokes, giving total coverage to the entire concrete fish tank / water trough.

2. Allow to dry.

3. Examine the concrete fish tank / water trough for cracks in need of repair. Bag on a cement slurry using Sealit Multipurpose in the cement mix (approximately 1:3 with the water).

4. Allow to dry.

5. Apply one coat neat Sealit Multipurpose (applied as above).

6. Allow to dry.

7. Apply a second coat of neat Sealit Multipurpose (applied as above).

8. Allow to dry thoroughly before refilling.

APPLICATION

Best method - Low pressure airless spray or pump up garden spray.

COVERAGE

Neat Sealit Multipurpose - Approximately 10m2 per litre.

'Soak in Mix', (50% Sealit Multipurpose, 50% water) - Approximately 5m2 per litre.

i.e. flat masonry surface - approx 100sqm / 20L pail - two coat application.

WARNING / NOTES

During the curing period, (4-12 months), clear Sealit Multipurpose may show up slightly cloudy when wet. This will disappear when the surface dries out.

Wash all equipment immediately in water. If product has dried on equipment, clean with a petrol or mineral turpentine dampened cloth (Taking normal safety precautions).

GUARANTEES

Product guarantees are available to all approved applicators.