AUSTRALIAN
MADE
AUSTRALIAN
OWNED


Clear drying, water based, mid sheen acrylic.

PROTECTIVE COATING

SIZES - 1 Litre, 5 Litre, 15 Litre, - CLICK HERE TO DOWNLOAD DATA SHEET

RECOMMENDED RETAIL PRICES


COMMON USES

**FOLLOW LINKS FOR FULL DIRECTIONS**

 

INTERIOR / TIMBER / BRICK FEATURE WALLS / MASONRY

ANTI-GRAFFITI

AND MANY OTHER USES REQUIRING A MID-SHEEN PROTECTIVE OR DECORATIVE FINISH!

 

COVERAGE.

Neat Glaze - Approximately 10m2 per litre.

 

WARNING / NOTES

Do not use Glaze on exterior timber - as ultra violet rays will penetrate, damaging timber and causing adhesion failure.

Beware of Driveways - particularly non-porous or silicone dipped pavers as hot tyres and heavy vehicles can cause surface damage.

Allow adequate curing time - Before using as a trafficable area.

When coating interior of single leaf bricks / blocks be sure that they are totally dry or exterior waterproofing may result in damage.

Do not "flood coat" floors or paths as "pooling" may occur causing curing problems.

Glaze may be tinted for a semi-transparent timber colour, the formula for polyurethane is suitable - or discuss it with your paint specialist.

During the curing period Glaze may appear cloudy when wet, this will clear when dry.

Wash all equipment immediately in water. If product has dried on equipment, clean with a petrol dampened cloth (Taking normal precautions).

 

GUARANTEES

Product guarantees are available to all approved applicators.


IMPORTANT
Directions for preparation and application are clearly written on the labels - Please follow them!
All instructions are a guide only - situations may vary and no liability is taken by Shalex Industries Pty Ltd. or the author – Product guarantees Issued by approved applicators only.
Back to Shalex Industries homepage