| AUSTRALIAN MADE |
 |
AUSTRALIAN OWNED |
GRAFFITI RETARDANT
| USING |
| Note: Sealit Multipurpose is not suitable for traffic areas. In these areas Glaze is recommended to reduce oil and dirt penetration and allowing for easier cleaning and a longer life. |
DIRECTIONS
-
First, clean the surface to protectively / decoratively coat.
-
Apply one coat neat Glaze, giving total coverage to the entire area.
-
Allow to dry.
-
Apply a second coat of neat Glaze (applied as above).
-
Allow to dry.
- Graffiti is now easier to deal with, and should be much easier to remove from the treated surface using a graffiti removal product and a high pressure cleaner.
APPLICATION
Best method - Roller-brush, sponge or spray.
COVERAGE.
Neat Glaze - Approximately 10m2 per litre.
WARNING / NOTES - GLAZE
Do not use Glaze on exterior timber - as ultra violet rays will penetrate, damaging timber and causing adhesion failure.
When coating interior of single leaf bricks / blocks be sure that they are totally dry or exterior waterproofing may result in damage.
Do not "flood coat" floors or paths as "pooling" may occur causing curing problems.
During the curing period Glaze may appear cloudy when wet, this will clear when dry.
Wash all equipment immediately in water. If product has dried on equipment, clean with a petrol dampened cloth (Taking normal precautions).
GUARANTEES
Product guarantees are available to all approved applicators.
| IMPORTANT Directions for preparation and application are clearly written on the labels - Please follow them! All instructions are a guide only - situations may vary and no liability is taken by Shalex Industries Pty Ltd. or the author – Product guarantees Issued by approved applicators only. |
