| AUSTRALIAN MADE |
 |
AUSTRALIAN OWNED |
PAVERS / DRIVEWAY / CARPARKS / WALKWAY / FLOORS, (i.e. PAINTED MASONRY, SLATE, TERRACOTTA, SANDSTONE) / POOL SURROUND ETC.
| SEALING USING |
| Note: Sealit Multipurpose is not suitable for traffic areas. In these areas Glaze is recommended to reduce oil and dirt penetration and allowing for easier cleaning and a longer life. |
DIRECTIONS
-
First, clean the surface thouroughly. A high-pressure cleaner is recommended for most surfaces.
-
Apply one coat neat Glaze, giving total coverage to the entire area.
-
Allow to dry.
-
Apply a second coat of neat Glaze (applied as above).
-
Allow to dry.
APPLICATION
Best method - Roller-brush, sponge or spray.
COVERAGE.
Neat Glaze - Approximately 10m2 per litre.
WARNING / NOTES - GLAZE
Beware of Driveways - particularly non-porous or silicone dipped pavers as hot tyres and heavy vehicles can cause surface damage.
Allow adequate curing time - Before using as a trafficable area.
Do not "flood coat" floors or paths as "pooling" may occur causing curing problems.
During the curing period Glaze may appear cloudy when wet, this will clear when dry.
Wash all equipment immediately in water. If product has dried on equipment, clean with a petrol dampened cloth (Taking normal precautions).
GUARANTEES
Product guarantees are available to all approved applicators.
| IMPORTANT Directions for preparation and application are clearly written on the labels - Please follow them! All instructions are a guide only - situations may vary and no liability is taken by Shalex Industries Pty Ltd. or the author – Product guarantees Issued by approved applicators only. |
