AUSTRALIAN MADE

AUSTRALIAN OWNED

PRECAST CONCRETE TANK

NON TOXIC !

DIRECTIONS

1. In preparation, the tank must be totally emptied, dry and clean before any procedure takes place.

2. Apply one liberal coat of 'Soak in Mix', (50% Sealit Multipurpose, 50% water), giving total coverage to the entire interior of the concrete tank.

3. Allow to dry.

4. Examine the concrete tank for cracks in need of repair. Bag on a cement slurry using Sealit Multipurpose in the cement mix (approximately 1:3 with the water).

5. Allow to dry.

6. Apply one coat neat Sealit Multipurpose (applied as above).

7. Allow to dry.

8. Apply a second coat of neat Sealit Multipurpose (applied as above).

9. Allow to dry thoroughly before refilling.

APPLICATION

Best method - Low pressure airless spray or pump up garden spray.

COVERAGE

Neat Sealit Multipurpose - Approximately 10m2 per litre.

'Soak in Mix', (50% Sealit Multipurpose, 50% water) - Approximately 5m2 per litre.

i.e. flat masonry surface - approx 100sqm / 20L pail - two coat application.

WARNING / NOTES

During the curing period, (4-12 months), clear Sealit Multipurpose may show up slightly cloudy when wet.

Wash all equipment immediately in water. If product has dried on equipment, clean with a petrol or mineral turpentine dampened cloth (Taking normal safety precautions).

GUARANTEES

Product guarantees are available to all approved applicators.