Loading... Please wait...
  • Repel It Clear Water and Stain Repellent

Repel It

ZAR2,033.57
Shipping:

You can check shipping costs for this product by adding the size and qty to the shopping cart then use the estimate shipping and tax feature in the shopping cart

Quantity:


REPEL IT

HIGH PERFORMANCE CLEAR WATER AND STAIN REPELLENT

Repel It is a high-performance penetrating silane-siloxane sealer in a rapid dry formulation. Designed for application by spray, roller or dipping, Repel It allows rapid application over large areas in a single flood coat.

Repel It provides a long-lasting water and stain barrier and can be used on a wide variety of substrates such as concrete, masonry, pavers, natural stone, sandstone, slate, metal and timber.

Repel It contains two complementary silicones; a deeply penetrating Alkoxy Silane and a powerful Siloxane repellent, that react with the surface to form a protective barrier. Repel It is resistant to UV, heat and oxidisation. It provides protection from rebar corrosion, efflorescence, freeze/thaw damage, water penetration, oil penetration, mould and mildew.

Repel It is a clear coating and will enhance the natural colours in the substrate bringing dull surfaces to life. Repel It does not make the surface slippery or change the surface texture making it an ideal sealer for wet areas like pool surrounds and food service areas.

Repel It is a hydrophobic agent that acts to prevent liquid absorption, food and beverage and salt stains. It also offers added resistance to staining from oil-based contaminants and assists in the removal of substances like chewing gum and food.

Repel It creates a powerful water and liquid beading action on both porous and nonporous surfaces, which develops in as little as 4 hours after application. Tests have shown Repel It provides long term surface protection for metals and reduces or eliminates ‘tea bag’ staining on stainless steel caused by salt particles and other airborne pollution and particulates that settle on the surface. The use of Repel It makes it difficult for these particles to form a bond with the surface and they can easily be removed by rain or a light rinse with water.

Repel It does not form a film and will allow the surface to ‘breathe’. Moisture and air can migrate through the coating while it acts to stop the absorption of liquids into the surface.

Repel It is suitable for use on alkaline surfaces such as new concrete. It has excellent substrate wetting and penetration and provides the rapid development of water repellence.

Repel It can also be used for in-plant impregnation of building materials made of clay, fibrous cement, sand/lime bricks and blocks and lightweight concrete.

To view the Application Guide and Safety Data Sheet, please click on the documents tab.

PRODUCT USES

  • Concrete
  • Bricks & Blocks
  • Pool Surrounds
  • Paths & Driveways
  • Concrete and Clay pavers
  • Sandstone and natural stone
  • Slate
  • Timber
  • Metal
  • Interior & Exterior surfaces

HELPFUL TIPS!

If exposed to weather, do not apply if rain is imminent. Do not apply to a wet surface or if the temperature is below 2°C or above 40°C. Applying the solution during cold weather, where there is limited or no air flow over the treated surface, may result in the surface failing to dry. In enclosed areas introducing air flow by using a fan will assist in curing.

NOTE

Protect from rain for at least 6 hours after application. If rain occurs during application stop and cover area immediately.

Repel It provides a long-lasting barrier for water and stain protection. Repel It is not recommended for application over non-porous surfaces which are to be painted or covered as adhesion of the paint or coating may be affected.

RECOMMENDATION 

Do not apply to wet surfaces

TECHNICAL DATA

No. of coats 1 Flood Coat (additional wet on wet coats may be applied to increase performance)
Coverage 1L = approx 4m² (Concrete)
1L = approx 8m² (Timber)
1L = approx 15m² (Metal)
Drying Time 6 hours
Fully Cured 24 hours
Clean Up Solvent
Shelf Life 5 years
Store Below 40°C
Application Temperature 2°C - 40°C
Application Low pressure sprayer, brush, broom, lambswool applicator

 

DISCLAIMER

Customers are advised to consider the information in this data sheet in the context of how the product will be used, including surfaces and any other products used. The information provided in this data sheet represents our best scientific and practical knowledge. Any advice, information or assistance provided by Shalex in relation to its products is given in good faith, however, is provided without liability or responsibility. Due to the wide variety of site conditions we are unable to assume liability for any loss that may arise from the use of our products. The user is responsible for checking the suitability of products for their intended use.

product-application-guide-button1.png material-safety-data-sheet-button.png

Repel It is an alcohol based sealer and is classified as a dangerous good for transportation. We can ship this product to most areas via our courier. Add this product to your cart and use the estimate shipping and tax feature to view shipping charges to your location. If you live in a remote location, please contact us for freight details.

Find Similar Products by Category

Customers Who Viewed This Product Also Viewed




Connect with us: Facebook YouTube

Sign up to our newsletter