Loading... Please wait...
  • Shalex Industries Stick It

Stickit

ZAR414.36
Shipping:

You can check shipping costs for this product by adding the size and qty to the shopping cart then use the estimate shipping and tax feature in the shopping cart

Quantity:


STICKIT

ADHESIVE FOR DELAMINATED POROUS SUBSTRATES.

StickIt is a new generation adhesive specifically designed to fix loose or drummy tiles without having to pull them up. StickIt will also fix drummy render and will save you time, money and inconvenience.

Repairing loose tiles is easy with the StickIt Tile Repair Kit. Simply drill, inject and forget.

The StickIt Tile Injection Kit comes with all you need to fix drummy or loose tiles in place and is available in 1 litre and 5 litre kits for smaller or larger jobs. StickIt is available in 1 litre and 5 litre refills if you run out; or if you're a handyman, then the 15-litre refill may be the way to go.

Repairing loose tiles used to mean pulling them all up and re-laying them which can cost thousands of dollars. Not any more - The StickIt Tile Injection Repair Kit is so easy to use, almost anyone with a drill can do it.

Why pay huge repair bills when you can do it yourself!

Detailed Project Instructions, Application Guide and SDS are available by clicking on the Documents tab.

stickit-screenshot.png

Click on the image above to view our StickIt videos...

PRODUCT USES

  • To fix drummy or delaminated floor and wall tiles
  • Fix bubbles in paintwork
  • Loose laminates
  • Creaking wood floors
  • Timber joint or crack adhesive
  • Reinforce cement render or plaster
  • Rebond carpets and fabrics

PRECAUTIONS

The injector needle is very sharp - keep the protector on at all times when not in use and keep out of reach of children.

Protect or mask all porous surfaces as StickIt will leave a tacky surface if left exposed.

StickIt displays exceptional adhesion to all surfaces. It does not peel off glass, steel & aluminium, timber & laminates, plastics, ceramic tiles or other smooth hard surfaces like traditional adhesives and must be removed with thinners or solvents when dry.

Remove excess StickIt with a damp cloth before drying.

COVERAGE

Coverage is dependent on the size of the delaminated cavity and can differ widely from job to job. As a guide 1Ltr of StickIt will treat approx. 10m² of render, plaster or wall tile and 5m² of floor tile. Larger tiles or natural stone are typically laid with a larger notched trowel and voids can be significantly larger.

DRYING TIME

Dependant on porosity of substrates and depth of cavity. In renders, screeds, masonry and fabrics StickIt will dry within 12-24 hours at 25°C. Drying time will be extended in deep cavities or where moisture vapour is restricted from escaping. Leave floor tiles for 2-3 days before walking on them again - longer in cooler temperatures. As StickIt cures from outside in, thin films are preferred to maximise surface area in contact with the adhesive.

IMPORTANT!

StickIt is not a caulk and should not be used to fill gaps, joints or deep cavities.

REPLACEMENT PARTS

Replacement Drill Bits are available to purchase from our Accessories page.

Should you require other parts such as plugs or needles that may have become unusable, please feel free to contact us by email or phone (1300 720 535).

TECHNICAL DATA

Coverage

Floor Tiles: 1L = approx. 5m²
Wall Tiles: 1L = approx. 10m²

Drying Time 12 - 24 Hours
Fully Cured 3 Days
Clean Up Water
Shelf Life 24 Months
Store Below 35°C
Application Temperature 5°C - 25°C

 

DISCLAIMER

Customers are advised to consider the information in this data sheet in the context of how the product will be used, including surfaces and any other products used. The information provided in this data sheet represents our best scientific and practical knowledge. Any advice, information or assistance provided by Shalex in relation to its products is given in good faith, however, is provided without liability or responsibility. Due to the wide variety of site conditions we are unable to assume liability for any loss that may arise from the use of our products. The user is responsible for checking the suitability of products for their intended use.

 product-application-guide-button1.png material-safety-data-sheet-button.png stickit-instructions-and-assembly-guide-button.png

                                                                                       Note the assembly guide PDF is a large file

 

Stickit is a water based adhesive and not classified as a dangerous good for transportation. We can ship this product to all countries via postal services and have express courier options for selected countries and locations. Add this product to your cart and use the estimate shipping and tax feature to view shipping charges to your location.

Find Similar Products by Category

Customers Who Viewed This Product Also Viewed




Connect with us: Facebook YouTube

Sign up to our newsletter